Our Blog

Posts for: December, 2017

By Dentistry by Design
December 26, 2017
Category: Dental Procedures
IfYoureConsideringBracesHeresHowTheyWork

If you or a family member has problems with teeth alignment or your bite, you may be considering braces. This tried and true method can straighten out most smiles — but there's more to braces than you may realize.

For one thing, orthodontic treatment wouldn't work if it weren't for the natural mechanism for tooth movement that already exists in the mouth. It may seem your teeth are rigidly set in the jawbone but that's not how they maintain their attachment: that's the job of an elastic connective tissue known as the periodontal ligament that lies between the tooth and the bone. The ligament has tiny fibers that attach to the tooth on one side and to the bone on the other to actually hold the teeth in place, much like a hammock secured between two posts.

The ligament attachment also allows the teeth to move incrementally in response to environmental factors or the aging process. We harness this natural movement ability with braces to move teeth to a more desirable position. We first attach small brackets to the front crowns of the teeth (the visible portion) and then string arch wires through them. We then attach the wires to anchor points where we can adjust the amount of tension they're exerting through the brackets against the teeth. By gradually increasing that tension, the teeth respond as they would when any force is applied against them and begin to move.

By precisely controlling that movement we can transform a patient's smile. But we believe the advantages are more than cosmetic: the teeth will function better and will be easier to care for and keep clean. These benefits, though, have to be balanced with heightened risks for root resorption (something that occurs only about 10% of the time) in which the ends of the roots can shrink, or loss of mineral content in teeth enamel where the hardware makes it more difficult to remove bacterial plaque. These risks can be reduced by closely monitoring dental health during the entire treatment process and through stepped up efforts in daily oral hygiene.

The starting point for deciding on an orthodontic treatment is a thorough dental examination with x-rays or CT scan imaging. Once we have a complete picture of your misalignment problems and any other extenuating circumstances, we can recommend a treatment plan just for you.

If you would like more information on orthodontic treatment, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Moving Teeth with Orthodontics.”


By Dentistry by Design
December 11, 2017
Category: Dental Procedures
Tags: porcelain veneers  
ChangeYourSmilefortheBetterwithPorcelainVeneers

Are you tired of those stained, chipped, slightly crooked or—in a word—unattractive teeth? We have an effective solution for you: cover them with life-like porcelain veneers.

As the name implies, a veneer is a thin layer of dental porcelain custom-made to match your tooth’s shape and color and permanently bonded to the outside enamel. With its translucent, light-reflective quality similar to tooth enamel, dental porcelain looks completely natural. Veneers are well suited for minor to moderate imperfections, and can even be used to correct slight gaps between teeth.

We begin the process by performing a comprehensive dental exam to begin planning the exact shape and color of your new veneers. We can now do much of this planning with computer imaging, which may also give you the chance to see how your veneers will look on you after treatment.

We often will also need to prepare the teeth to accommodate the veneers when we bond them. Although the alterations shouldn’t be anywhere near as extensive as with a porcelain crown, we will still often need to remove some of the enamel layer so the veneer won’t look bulky. Even though we’ll remove as little as possible, if needed it will still permanently alter your teeth—so they’ll require some form of restoration from then on.

Once we’ve prepared the teeth, it’s then time to create the veneers. This is typically done by a dental laboratory technician through a manual process that may take several weeks. Increasingly, though, equipped dental offices are now able to generate their veneers in-house with computer-aided design/computer-aided manufacture (CAD/CAM) milling technology.

Once the veneers are ready, they’re bonded securely to the teeth with a detailed process that helps ensure they’ll endure biting and chewing forces for a long time. Still, you’ll need to avoid biting into hard objects or using your teeth for such things as cracking nuts. If you have a clenching or grinding habit, we may also recommend you wear a night guard to prevent excessive forces against not just your veneers but your teeth as well.

By taking good care of them, your new veneers can give you many years of service. Most of all, they can transform your embarrassing appearance into a smile you’re proud to show.

If you would like more information on porcelain veneers, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Porcelain Veneers.”


By Dentistry by Design
December 06, 2017
Category: Oral Health

Some people don’t go in for regular professional teeth cleanings because they don’t really understand why they’re important. Not visiting teeth cleaningsthe dentist regularly is a top reason why many patients come to the dentist with problems that could have been prevented. Learn more about why you should make an appointment in the near future with Dr. Nicholas Papapetros, Dr. Jhon Giraldo, and Dr. Leo Kharin at Dentistry By Design in Andover, MA for a cleaning and exam.

Professional Teeth Cleanings
For good oral hygiene, you must incorporate professional teeth cleanings into your yearly schedule. The American Dental Association recommends twice yearly visits—more if you’ve had past dental problems. Your dentist has the tools and knowledge to ensure that your whole mouth, from the back molars to the front teeth, is completely clear of food and plaque. Instead of a standard brush, the dentist uses a scaling tool that does a more thorough job. ‚Äč

Why Are They Necessary?
Some people wonder why they have to get professional teeth cleanings if they brush their teeth regularly at home. The answer is simply that your dentist does a much better job of clearing the gumline and tooth surfaces of plaque. Plaque and tartar buildup is the main culprit behind gum disease. At a professional tooth cleaning session, your Andover, MA dentist will also carefully check your teeth to ensure that you don’t have cavities. 

Other Benefits of Professional Cleanings
Another benefit of a professional cleaning is that your dentist can consult you about possible treatments that can help your smile. It will give you an opportunity to think about them for your next visit. For instance, if you have a missing tooth you may be eligible for dental implants. If a patient is prone to cavities, a dental sealant treatment might help.

Make Your Appointment Today
After your teeth are cleaned professionally, you can start a new dental hygiene routine that will ensure your smile stays clean and healthy. Call Dentistry By Design in Andover, MA today at 978-475-5333 to schedule an appointment with Dr. Nicholas Papapetros, Dr. Jhon Giraldo, or Dr. Leo Kharin.


By Dentistry by Design
December 03, 2017
Category: Oral Health
GiancarloStantonGetsMajor-LeagueMouthProtection

For major-league slugger Giancarlo Stanton, 2014 was a record-breaking year. After the baseball season ended, he signed a 13-year, $325 million contract with the Miami Marlins — the biggest deal in sports history. But earlier that same year, Stanton suffered one of the worst accidents in baseball: He was hit in the face by an 88-mph fastball, sustaining multiple fractures, lacerations, and extensive dental damage.

After the accident, Stanton didn’t play for the remainder of the season. But now he’s back in Spring Training… and he’s got a not-so-secret weapon to help protect him against another injury: A custom-made face guard designed to absorb impacts and keep him from suffering further trauma.

As sports fans, we’re glad that Stanton was able to overcome his injury and get back in the game. As dentists, we’d like to remind you that you don’t have to be a major-league player to feel the harmful effects of a sports injury — and you don’t have to look far to find a way to protect yourself. In fact, you can get a custom-made mouthguard right here at the dental office.

Mouthguards have a long tradition in sports like football, boxing, and hockey. But did you know that far more Americans are injured every year playing “non-collision” sports like basketball, baseball — and even bicycling? And it doesn’t take a major-league fastball to cause a dental injury: The highest incidence of sports-related dental injuries occurs in 15-to-18-year-old males. In fact, about one-third of all dental injuries among children stem from various types of sports activities. These injuries may result in countless hours being lost from school and work, and cost significant sums for treatment and restoration.

Mouthguards have a proven track record in reducing dental and facial injuries: They are capable of absorbing the energy of a blow to the mouth, and dissipating it in a way that prevents damage to facial structures and teeth. But not all mouthguards are created equal: Custom-fabricated mouthguards, which are produced from an exact model of your mouth made right here in the dental office, offer by far the best protection. They fit better and safeguard the teeth more fully than any off-the-shelf or “boil-and-bite” type can. Plus, they’re more comfortable to wear. And let’s face it: No mouth guard can protect your teeth if you don’t wear it.

What’s more, some recent studies indicate that custom-made mouthguards may offer significant protection against concussion. An increasing awareness of the dangers that concussion may pose to athletes is one more reason why we recommend custom-made mouthguards to active people and their families.

To get his face guard, Giancarlo Stanton reportedly went to a specialist sporting-goods manufacturer in Illinois, and paid around $1,000. But you can get a custom-made mouthguard for yourself or your loved ones right at our office for a fraction of that price. And the peace of mind it can give you is… priceless.

If you have questions about custom-made mouthguards, please contact us or schedule an appointment for a consultation. You can learn more by reading the Dear Doctor magazine articles “An Introduction to Sports Injuries & Dentistry” and “Athletic Mouthguards.”